Hi everyone,
I recently bought a Geeetech Prusa I3 Pro B and after some little problems I tried to make my first 3D print!
Unfortunately I encountered a problem that I cannot explain.
After some minutes from the start of the print I heard a noise and the Y axis lost its correct reference, printing the rest of the object not aligned (then I stopped the print, but probably the problem could happen again).
I attached a photo to show the problem, I hope you can help me because I really don't know how to solve it!
Thanks a lot in advance!
Prusa I3 Pro B - Problem with Y axis
Prusa I3 Pro B - Problem with Y axis
- Attachments
-
- IMG_5227.jpg (79.01 KiB) Viewed 24692 times
Re: Prusa I3 Pro B - Problem with Y axis
Hi,please check this link which is related to your case:https://www.geeetech.com/wiki/index.php ... salignment.
-Keep your mind and try to test it.
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: Prusa I3 Pro B - Problem with Y axis
I have the same problem.
Is there a solution for this problem?
Is there a solution for this problem?
Re: Prusa I3 Pro B - Problem with Y axis
Hello.
this is called layers shifting, it can be solved successfully.
this is called layers shifting, it can be solved successfully.
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
Re: Prusa I3 Pro B - Problem with Y axis
@_kaktus_ and do you have any idea how this can be solved successfully?
Re: Prusa I3 Pro B - Problem with Y axis
Hi,you can
1. check the tightness of your belt and make the appropriate adjustments;
2. Check whether the bearing and the pulley are issued, and the card can be lubricated for lubrication;
3. The printing speed is appropriately slowed down, the reference range is 30-60mm/s;
4.Driver board voltage range 0.8-1.2V
1. check the tightness of your belt and make the appropriate adjustments;
2. Check whether the bearing and the pulley are issued, and the card can be lubricated for lubrication;
3. The printing speed is appropriately slowed down, the reference range is 30-60mm/s;
4.Driver board voltage range 0.8-1.2V
-Keep your mind and try to test it.
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: Prusa I3 Pro B - Problem with Y axis
Hi
And William did it for me.
I would add one more important point. Read more of this forum.
Maybe not all the information will be useful at this stage, but nevertheless.
Have you already found a subforum for your printer model
Greetings to you, sir.
And William did it for me.
I would add one more important point. Read more of this forum.
Maybe not all the information will be useful at this stage, but nevertheless.
Have you already found a subforum for your printer model
Greetings to you, sir.
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
Re: Prusa I3 Pro B - Problem with Y axis
I got it. My Stepmotor Driver (a4988) was faulty.
Now my Printer works again.
Now my Printer works again.
Re: Prusa I3 Pro B - Problem with Y axis
Hi.
It's nice of you to tell us about the solution to your case.
It's nice of you to tell us about the solution to your case.
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.