Rotary Encoder behaves erraticaly

Post Reply
Posts: 26
Joined: Tue Oct 01, 2019 6:42 pm

Rotary Encoder behaves erraticaly

Post by Softfoot » Sun Nov 03, 2019 10:30 am

This is on my I3 Pro C with a GT2560 A+ board and LCD2004

It seems to need a variable number of rotation "clicks" to move the pointer on the menu - sometimes 3 or 4, sometime 1.

It also goes the wrong way to my way of thinking - I have to rotate it clockwise to move down and anticlockwise to move up.
Interestingly when on a number field it seems OK.

Any suggestions welcome,

Posts: 189
Joined: Sat Jan 26, 2019 8:42 am

Re: Rotary Encoder behaves erraticaly

Post by Jarda3d » Mon Nov 04, 2019 7:13 am

Add two 10nF to 100nF capacitors between the three legs of the encoder.
rotary_encoder.png (20.43 KiB) Viewed 5380 times
A10M Slic3r profile: here and fresh on github (lot of tips here)
A10 Slic3r profile: here
TIP: tight all screws and wheels (except right side of Z axis) and re-align frame while assembly. And silence it.

Post Reply

Who is online

Users browsing this forum: No registered users and 22 guests