G2/2S diagonal rod sliding on the bearing holder?!

Post Reply
Mark
Posts: 1553
Joined: Thu Aug 06, 2015 9:19 am

G2/2S diagonal rod sliding on the bearing holder?!

Post by Mark » Wed Feb 17, 2016 3:04 pm

Sometimes due to the poor quality of the rod-end bearing holder on the Delta Rostock G2/2S, the diagonal rod can not stay put on the holder and sliding back and forth on it, you can try to print a lock ring and secure it as follows:
ring.jpg
ring.jpg (121.76 KiB) Viewed 11431 times
ring1.jpg
ring1.jpg (222.49 KiB) Viewed 11431 times
After doing this the positioning will be much more accurate!
Download the stl file here:
RKMC-B01-check ring.zip
(7.62 KiB) Downloaded 370 times

spikey1973
Posts: 4
Joined: Tue Jan 26, 2016 9:15 am

Re: G2/2S diagonal rod sliding on the bearing holder?!

Post by spikey1973 » Sun Mar 06, 2016 4:09 am

had a similar thought.. thank you for sharing this design.. as soon as i get it up and running i will add those printed rings.

Kind greatings

Matt

scunucchiuz
Posts: 1
Joined: Tue Jun 07, 2016 4:51 am

Re: G2/2S diagonal rod sliding on the bearing holder?!

Post by scunucchiuz » Tue Jun 07, 2016 4:58 am

sorry i have a same problem.
you have solved the problem whit washer?

who is possible to buy the aluminum bushing? how much?

cordon
Posts: 1
Joined: Fri Feb 24, 2017 7:07 pm

Re: G2/2S diagonal rod sliding on the bearing holder?!

Post by cordon » Fri Feb 24, 2017 9:59 pm

Hello mark,
I want to make some washers before assembling my Delta Rostock Mini, but the 3D printing shop ask me some dimensions: the height, the outer diameter, etc..
Can you please give some dimensions of the washer?
Thank you.
Reality is the ruin of a fairy tale.

Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests