Marlin 1.1.8 with BLTouch for i3 Pro B - with T8 Lead Screw
Posted: Mon Feb 26, 2018 4:17 am
Hi
If you guys interested here is latest Marlin Firmware I prepared for my Geeetech i3 Pro B with BLTouch bed leveling sensor. My printer is using GT2560 A+ motherboard - using pin 11 for BLTouch (original firmware is using pin 32 but it doesn't work on my device). Spent a lot of time troubleshooting issues, calibrating but finally was able print good objects !
My previous post https://www.geeetech.com/forum/viewtopi ... 20&t=60548 was for "stock" Geeetech Prob B printer with BLTouch probe - right now I upgraded my printer and replaced stock Threaded Rod with T8 Lead Screw - huge improvement ! ( please note that I'm still newbie in 3D printing hobby so something which is HUGE for me might be nothing for you Pro guys :-) ) but anyway - below link for new 1.1.8 Firmware for Geeetech i3 Pro B printer with BLTouch sensor and T8 Lead screw
Again as always I would like to send Big Thanks to Olimatou who uploaded his modifications for 1.1.4 Firmware ( https://www.geeetech.com/forum/viewtopi ... 20&t=19846 ) - I doubt I will be able prepare 1.1.7 and then 1.1.8 without his guidance in previous version.
Latest Update 02/25/2018 2:13 PM CST ( REMEMBER this is for printer with T8 Lead screw ! )
1.1.8 Firmware for Geeetech i3 Pro B printer with BLTouch sensor and T8 Lead screw -> https://goo.gl/YNLZSS
REMEMBER this is for printer with T8 Lead screw - for these people who doesn't know what is that - see the difference
[img] https://photos.app.goo.gl/Mbvu0mWLlItWmiMl1 [/img]
[img] https://photos.app.goo.gl/fGLMWPi7ujpayYQj1 [/img]
Thanks
Wes
If you guys interested here is latest Marlin Firmware I prepared for my Geeetech i3 Pro B with BLTouch bed leveling sensor. My printer is using GT2560 A+ motherboard - using pin 11 for BLTouch (original firmware is using pin 32 but it doesn't work on my device). Spent a lot of time troubleshooting issues, calibrating but finally was able print good objects !
My previous post https://www.geeetech.com/forum/viewtopi ... 20&t=60548 was for "stock" Geeetech Prob B printer with BLTouch probe - right now I upgraded my printer and replaced stock Threaded Rod with T8 Lead Screw - huge improvement ! ( please note that I'm still newbie in 3D printing hobby so something which is HUGE for me might be nothing for you Pro guys :-) ) but anyway - below link for new 1.1.8 Firmware for Geeetech i3 Pro B printer with BLTouch sensor and T8 Lead screw
Again as always I would like to send Big Thanks to Olimatou who uploaded his modifications for 1.1.4 Firmware ( https://www.geeetech.com/forum/viewtopi ... 20&t=19846 ) - I doubt I will be able prepare 1.1.7 and then 1.1.8 without his guidance in previous version.
Latest Update 02/25/2018 2:13 PM CST ( REMEMBER this is for printer with T8 Lead screw ! )
1.1.8 Firmware for Geeetech i3 Pro B printer with BLTouch sensor and T8 Lead screw -> https://goo.gl/YNLZSS
REMEMBER this is for printer with T8 Lead screw - for these people who doesn't know what is that - see the difference
[img] https://photos.app.goo.gl/Mbvu0mWLlItWmiMl1 [/img]
[img] https://photos.app.goo.gl/fGLMWPi7ujpayYQj1 [/img]
Thanks
Wes