Marlin 1.1.8 with BLTouch for i3 Pro B - with T8 Lead Screw

wwysocki
Posts: 6
Joined: Thu May 18, 2017 3:54 am

Marlin 1.1.8 with BLTouch for i3 Pro B - with T8 Lead Screw

Post by wwysocki » Mon Feb 26, 2018 4:17 am

Hi

If you guys interested here is latest Marlin Firmware I prepared for my Geeetech i3 Pro B with BLTouch bed leveling sensor. My printer is using GT2560 A+ motherboard - using pin 11 for BLTouch (original firmware is using pin 32 but it doesn't work on my device). Spent a lot of time troubleshooting issues, calibrating but finally was able print good objects !

My previous post https://www.geeetech.com/forum/viewtopi ... 20&t=60548 was for "stock" Geeetech Prob B printer with BLTouch probe - right now I upgraded my printer and replaced stock Threaded Rod with T8 Lead Screw - huge improvement ! ( please note that I'm still newbie in 3D printing hobby so something which is HUGE for me might be nothing for you Pro guys :-) ) but anyway - below link for new 1.1.8 Firmware for Geeetech i3 Pro B printer with BLTouch sensor and T8 Lead screw

Again as always I would like to send Big Thanks to Olimatou who uploaded his modifications for 1.1.4 Firmware ( https://www.geeetech.com/forum/viewtopi ... 20&t=19846 ) - I doubt I will be able prepare 1.1.7 and then 1.1.8 without his guidance in previous version.

Latest Update 02/25/2018 2:13 PM CST ( REMEMBER this is for printer with T8 Lead screw ! )
1.1.8 Firmware for Geeetech i3 Pro B printer with BLTouch sensor and T8 Lead screw -> https://goo.gl/YNLZSS



REMEMBER this is for printer with T8 Lead screw - for these people who doesn't know what is that - see the difference

[img] https://photos.app.goo.gl/Mbvu0mWLlItWmiMl1 [/img]

[img] https://photos.app.goo.gl/fGLMWPi7ujpayYQj1 [/img]

Thanks
Wes
Last edited by wwysocki on Mon Feb 26, 2018 10:44 am, edited 1 time in total.

User avatar
William
Site Admin
Posts: 5394
Joined: Tue Jun 07, 2016 9:38 am

Re: Marlin 1.1.8 with BLTouch for i3 Pro B - with T8 Lead Screw

Post by William » Mon Feb 26, 2018 10:40 am

Wow!Thank you for sharing!
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

wwysocki
Posts: 6
Joined: Thu May 18, 2017 3:54 am

Re: Marlin 1.1.8 with BLTouch for i3 Pro B - with T8 Lead Screw

Post by wwysocki » Mon Feb 26, 2018 10:47 am

No problem - hope someone will find it useful :-) - that upgrade was worth all the money and time I spent on it - prints are much much better than before :-)

User avatar
William
Site Admin
Posts: 5394
Joined: Tue Jun 07, 2016 9:38 am

Re: Marlin 1.1.8 with BLTouch for i3 Pro B - with T8 Lead Screw

Post by William » Mon Feb 26, 2018 11:19 am

I agree with your point.T8 is more stable than M8 rod.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

User avatar
William
Site Admin
Posts: 5394
Joined: Tue Jun 07, 2016 9:38 am

Re: Marlin 1.1.8 with BLTouch for i3 Pro B - with T8 Lead Screw

Post by William » Mon Feb 26, 2018 1:23 pm

Can I share your post?I think your post may help a lot of people
I will mark your ID
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

wwysocki
Posts: 6
Joined: Thu May 18, 2017 3:54 am

Re: Marlin 1.1.8 with BLTouch for i3 Pro B - with T8 Lead Screw

Post by wwysocki » Mon Feb 26, 2018 2:08 pm

oh yeah no problem at all - would be more than happy to help other if only would be able

1138
Posts: 0
Joined: Sun Feb 04, 2018 1:41 pm

Re: Marlin 1.1.8 with BLTouch for i3 Pro B - with T8 Lead Screw

Post by 1138 » Tue Feb 27, 2018 4:41 am

@wwysocki, I recently contributed a couple of example/reference configurations to branch bugifx-1.1.x of the official Marlin repo. It'd be awesome if you could just add yours there: https://github.com/MarlinFirmware/Marli ... %20Pro%20B

Note that there are two versions: with and without bltouch. But there is none for T8 Lead Screws, both are for M8 rods.

Marco Zuccati
Posts: 0
Joined: Fri Dec 15, 2017 4:33 pm

Re: Marlin 1.1.8 with BLTouch for i3 Pro B - with T8 Lead Screw

Post by Marco Zuccati » Wed Mar 07, 2018 5:13 pm

Hi to all, i mtry to flash the 1.1.8 bltouch t8screws firmware but during convalidate in arduino, appear this error message.. i know its about the bed measure..but i don t know how to do now,......

please,can someone help me for this?

thank again for all the works.

Marco
Attachments
errore marlin 1.18.JPG
errore marlin 1.18.JPG (81.25 KiB) Viewed 17204 times

guipedroso
Posts: 0
Joined: Thu Feb 08, 2018 10:25 pm

Re: Marlin 1.1.8 with BLTouch for i3 Pro B - with T8 Lead Screw

Post by guipedroso » Fri Mar 09, 2018 9:42 am

You must select the correct board... go to "tools" --> "board" --> Mega2560

andyparla
Posts: 0
Joined: Wed Mar 14, 2018 7:21 pm

Re: Marlin 1.1.8 with BLTouch for i3 Pro B - with T8 Lead Screw

Post by andyparla » Thu Mar 15, 2018 1:21 am

I have the same issue at this line and I have the correct board. anyone knows what happens?

Locked

Who is online

Users browsing this forum: No registered users and 40 guests