extruder problem for ABS print

Post Reply
krcma
Posts: 2
Joined: Sun Jan 07, 2018 12:45 am

extruder problem for ABS print

Post by krcma » Sun Jan 07, 2018 3:48 am

Through ebay i ordered a printerGeeetech aluminium Prusa mk2 i3. The extruder does not want to print ABS material. What am I wrong with? Tnx for help.

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: extruder problem for ABS print

Post by William » Mon Jan 08, 2018 4:29 pm

Could you give us more details about the issue?
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

krcma
Posts: 2
Joined: Sun Jan 07, 2018 12:45 am

Re: extruder problem for ABS print

Post by krcma » Fri Jan 12, 2018 6:57 am

Hello.
I have more problems with my Geeetech alu prsa 3d printer.
I do not know how to change the direction of the engine on the Z-rod. I do not know how to teach firmer Marlin-Arduino as described in the forum. I managed to turn the wire switches so now the engines go in the right direction.
Printer prints PLA PRO wire, edges are very rough. The ABS wire comes out for 5 seconds and then goes out of the nozzle.
tnx for help

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: extruder problem for ABS print

Post by William » Fri Jan 12, 2018 4:33 pm

The temperature of ABS is 230-270 and the bed is 95C
If you don't know how to change the direction of the motor, you can upload the configuration.h file to google drive.
I will help you in my spare time.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply