MeCreator 2 Extruder not moving

Post Reply
HowKudYou
Posts: 7
Joined: Wed May 10, 2017 3:53 pm

MeCreator 2 Extruder not moving

Post by HowKudYou » Thu May 25, 2017 3:17 am

Hello!
I recently bought a MeCreator 2 and wanted to print something. After the Bed and the Extruder are heated up, it starts to print, but the Extruder is not moving, so it prints a straight line!
When I want to control the Extruder through the Software, it moves, but the X and Y coordinates seem to be wrong.

What can I do about that?

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: MeCreator 2 Extruder not moving

Post by William » Thu May 25, 2017 9:04 am

Hi,as to the extruder issue,you can check this post at first:http://www.geeetech.com/forum/viewtopic ... 19&t=17097;
as to the wrong X and Y coordinates,I don't really understand it.Do you mean the wrong moving direction or something?If you mean the wrong direction,you need to change some value in the firmware.Check this post for more details:http://www.geeetech.com/forum/viewtopic ... 17&t=17037.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply