Extruder thermistor E0 damaged Solution

Post Reply
Din0
Posts: 26
Joined: Mon Jan 27, 2020 9:33 pm

Extruder thermistor E0 damaged Solution

Post by Din0 » Thu Jun 11, 2020 3:43 am

Hi
it is necessary to transfer the cable from the damage to the E0 thermistor to the extruder input E1 image.
PinOutV GT3260.png
PinOutV GT3260.png (388.95 KiB) Viewed 290 times
Edit file " pins_GT2560_V3.h" FW MArlin 2.x (Use 2.0.5.3 ) as follows:

Marlin\src\pins\mega\pins_GT2560_V3.h

// Temperature Sensors
//
#define TEMP_0_PIN 9 // Analog Input Original 11
#define TEMP_1_PIN 11 // Analog Input Original 9

that's all

Ales
IMG_20200612_203545_1.jpg
IMG_20200612_203545_1.jpg (546.52 KiB) Viewed 230 times
Last edited by Din0 on Mon Jun 15, 2020 3:31 am, edited 1 time in total.

User avatar
William
Site Admin
Posts: 6191
Joined: Tue Jun 07, 2016 9:38 am

Re: Extruder thermistor E0 damaged Solution

Post by William » Thu Jun 11, 2020 9:41 am

thank you for your sharing!
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply

Who is online

Users browsing this forum: No registered users and 9 guests