GT2560 extension board melted

Post Reply
Kimon
Posts: 1
Joined: Sat Apr 11, 2020 6:05 pm

GT2560 extension board melted

Post by Kimon » Sat Apr 11, 2020 6:22 pm

Hi I purchased a Geeetech prusa I3 A Pro 3D printer DIY kit back in November got it all set up and have done about 20-30 prints with 7 of these being 7-8 hours long.

On my last print there was a horrible smell around the house and it appears my GT2560 extension board has melted where the heat bed connection was.
I immediately turned of the printer.

Do you know where i can get a replacement board from? the eBay seller is being less that helpful currently, i believe to being because they have already had to replace all Z rods due to being bent, the aluminium heat bed as it wasn't flat and the extruder element as this had failed.

Thanks

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: GT2560 extension board melted

Post by William » Mon Apr 13, 2020 10:04 am

Hi, You can contact your sales for inquiries,
Or provide your order number, country, and email address for purchase.
Will make relevant inquiries for you.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply