Marlin FW 1.1.8 GT2560_V3 Pin out: ARE THEY RIGHT?

Post Reply
3DAngel
Posts: 77
Joined: Tue Aug 06, 2019 2:04 pm

Marlin FW 1.1.8 GT2560_V3 Pin out: ARE THEY RIGHT?

Post by 3DAngel » Tue Sep 17, 2019 12:43 pm

I'm scratching my head.....

comparing the sch GT256 V3 pin out vs Marlin 1.1.8 pins_GT2560_V3.0.h
PWM6 FAN...... Marlin =fan pin 9 vs sch = pin 16

pin 9 on sch = (CLKO/ICP3/INT7)PE7

Marlin FW download from Geetech github for A20M

any idea what is what???

Thanks again for your feedbacks
_

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Marlin FW 1.1.8 GT2560_V3 Pin out: ARE THEY RIGHT?

Post by William » Tue Sep 17, 2019 1:36 pm

Hi,
For firmware, you can check this: http://www.geeetech.com/forum/viewtopic ... 20&t=17046
Or the hex format firmware of the official website: https://www.geeetech.com/download.html?download_id=33
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

3DAngel
Posts: 77
Joined: Tue Aug 06, 2019 2:04 pm

Re: Marlin FW 1.1.8 GT2560_V3 Pin out: ARE THEY RIGHT?

Post by 3DAngel » Thu Sep 19, 2019 4:55 am

thanks William...

Post Reply