M201 to i3 Pro C

Post Reply
roman72
Posts: 1
Joined: Wed Aug 28, 2019 5:25 pm

M201 to i3 Pro C

Post by roman72 » Wed Aug 28, 2019 5:50 pm

Hi, I'd like to put dual extruder head with separate nozzles and heaters on my M201 but the gm32 board doesn't support firmware with dual extruders.What's the best option? I mean, i payed attention on gt 2560 board, but do i need to change motors, motor drivers, display board etc.when changing main board as well? I apreciate any answer, thanks

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: M201 to i3 Pro C

Post by William » Wed Aug 28, 2019 5:54 pm

-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

User avatar
_kaktus_
Site Admin
Posts: 1260
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: M201 to i3 Pro C

Post by _kaktus_ » Wed Aug 28, 2019 10:00 pm

Hello roman72.
:mrgreen:

I'm a little surprised at your plan. :o
This is because with M201 you can easily achieve Pro C functionality.

But okay, it's your printer and you can do whatever you want with it. :D
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

Post Reply