2560 Rev B - how to add Heatbed Mosfet?

Post Reply
redirect303
Posts: 16
Joined: Sat Jun 29, 2019 2:34 am

2560 Rev B - how to add Heatbed Mosfet?

Post by redirect303 » Thu Jul 25, 2019 10:33 pm

I'm thinking it wouldn't be the worst idea to take some stress off the board by putting an external mosfet board for the heatbed, the problem is that I couldn't figure out where to connect the triggering wire from the mosfet on the board.

Any help appreciated.

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: 2560 Rev B - how to add Heatbed Mosfet?

Post by William » Fri Jul 26, 2019 10:04 am

Hi, you can refer to this: http://www.geeetech.com/wiki/index.php/ ... GT2560A%2B

Our schematic is open source and you can view it:https://github.com/Geeetech3D/Prusa_I3_ ... evA%2B.pdf

I hope this can help you.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply