gt2560 all motors and extruder do nothing

Post Reply
manners13
Posts: 1
Joined: Thu Aug 09, 2018 11:16 pm

gt2560 all motors and extruder do nothing

Post by manners13 » Thu Aug 09, 2018 11:21 pm

as the subject says... half way through a print all the motors and extruder died at once. I have tested the motors with another control board and they are all fine.

anyone have any ideas.

I've tried disconnecting all motors except one and have no luck

new PSU. still no luck. fuses seem to test ok

I'm lost. maybe it's a new board time

Gingko
Site Admin
Posts: 230
Joined: Tue Apr 24, 2018 10:43 am

Re: gt2560 all motors and extruder do nothing

Post by Gingko » Fri Aug 10, 2018 4:22 pm

Did the lights on mainboard all extinguish?
You can do this simple test to the mainboard:
viewtopic.php?f=18&t=18061

Post Reply