Auto Leveling with a inductive sensor

Post Reply
Jeepfrog
Posts: 10
Joined: Tue Sep 15, 2015 7:11 am

Auto Leveling with a inductive sensor

Post by Jeepfrog » Sun Oct 18, 2015 7:39 am

Has anyone added an inductive sensor to there Delta Rostock mini G2s i have made the new platform and installed the sensor just not sure how to attach to the control board the only info i can find shows the RAMPS 1.4 board just not sure how to wire to the GT2560


Image

Image

Mark
Posts: 1553
Joined: Thu Aug 06, 2015 9:19 am

Re: Auto Leveling with a inductive sensor

Post by Mark » Mon Oct 19, 2015 4:57 pm


Jeepfrog
Posts: 10
Joined: Tue Sep 15, 2015 7:11 am

Re: Auto Leveling with a inductive sensor

Post by Jeepfrog » Thu Oct 22, 2015 6:17 pm

here is what i found seams to be working
4.jpg
4.jpg (77.25 KiB) Viewed 13733 times
4.jpg
4.jpg (77.25 KiB) Viewed 13733 times
Attachments
prox.JPG
prox.JPG (33.88 KiB) Viewed 13733 times

wayne
Posts: 2
Joined: Sat Nov 28, 2015 11:00 pm

Re: Auto Leveling with a inductive sensor

Post by wayne » Sun Nov 29, 2015 7:14 pm

where specifically i will connect the 12 v supply? is it on the GT2560 board or on the power supply?

RepMike
Posts: 18
Joined: Tue Jul 04, 2017 6:06 am

Re: Auto Leveling with a inductive sensor

Post by RepMike » Sat Oct 06, 2018 5:17 am

Thank you for this diagram! Does this also apply to the Current Board of the A10? I think this is the "Rev.B" board.

Post Reply