Page 2 of 2
Re: Melzi Ardentissimo Failure
Posted: Wed Dec 04, 2013 5:53 pm
by heimfabrikant
Ok, y and z are now running at 1/16 step, but x and e still don't run and the temperature is still wrong.
Any ideas for this?
thanks
Re: Melzi Ardentissimo Failure
Posted: Thu Dec 05, 2013 11:56 am
by techsupport
hi
guys
you can change the x motor ,and observe the motor rotation
Re: Melzi Ardentissimo Failure
Posted: Thu Dec 05, 2013 8:59 pm
by heimfabrikant
Hello again.
At melzi board no.1 i still dont get x and e motor running, i gave this up now.
At another board i now got all motors working but i still get wrong temperatures.
I compared the getech melzi with another melzi from UK and found out that there is diffrent hardware on the getech-melzi.
The Parts at "R4" and "R5" are "103", on the melzi from uk these parts are "472".
Does anybody know how to change this in firmware?
Re: Melzi Ardentissimo Failure
Posted: Mon Dec 09, 2013 8:58 am
by techsupport
hi
guys
you can download firmware from our WIKI website.