Melzi Ardentissimo Failure

heimfabrikant
Posts: 3
Joined: Thu Aug 15, 2013 11:29 pm

Re: Melzi Ardentissimo Failure

Post by heimfabrikant » Wed Dec 04, 2013 5:53 pm

Ok, y and z are now running at 1/16 step, but x and e still don't run and the temperature is still wrong.
Any ideas for this?

thanks

User avatar
techsupport
Posts: 210
Joined: Sat Mar 03, 2012 2:32 pm

Re: Melzi Ardentissimo Failure

Post by techsupport » Thu Dec 05, 2013 11:56 am

hi
guys

you can change the x motor ,and observe the motor rotation
Your real trustworthy partner in China!!
Email: forum@geeetech.com

heimfabrikant
Posts: 3
Joined: Thu Aug 15, 2013 11:29 pm

Re: Melzi Ardentissimo Failure

Post by heimfabrikant » Thu Dec 05, 2013 8:59 pm

Hello again.
At melzi board no.1 i still dont get x and e motor running, i gave this up now.
At another board i now got all motors working but i still get wrong temperatures.
I compared the getech melzi with another melzi from UK and found out that there is diffrent hardware on the getech-melzi.
The Parts at "R4" and "R5" are "103", on the melzi from uk these parts are "472".
Does anybody know how to change this in firmware?

User avatar
techsupport
Posts: 210
Joined: Sat Mar 03, 2012 2:32 pm

Re: Melzi Ardentissimo Failure

Post by techsupport » Mon Dec 09, 2013 8:58 am

hi
guys

you can download firmware from our WIKI website.
Your real trustworthy partner in China!!
Email: forum@geeetech.com

Post Reply

Who is online

Users browsing this forum: No registered users and 15 guests