gen6 unresponsive

grh
Posts: 5
Joined: Thu Sep 12, 2013 9:46 pm

gen6 unresponsive

Post by grh » Thu Sep 12, 2013 9:53 pm

I have been building another 3d printer and finally got to connect. The new board I just bought from you wont do anything but one startup boing, then all steppers drive erratically and crash the endstops. I replaced the new board with the one from my other printer and everything is good with my new printer.

User avatar
techsupport
Posts: 210
Joined: Sat Mar 03, 2012 2:32 pm

Re: gen6 unresponsive

Post by techsupport » Fri Sep 13, 2013 10:09 am

thanks for your post.
i wonder that do you firm the ware in the right way?
Does the stepper motors move?
Your real trustworthy partner in China!!
Email: forum@geeetech.com

grh
Posts: 5
Joined: Thu Sep 12, 2013 9:46 pm

Re: gen6 unresponsive

Post by grh » Fri Sep 13, 2013 6:43 pm

I cannot do anything because once I power up the board than after one boing all three axis start moving and wont stop till I power down.

I took the board from my other printer and replaced it to this one and everything is good, in fact I have already printed with it so I know there is nothing wrong with the printer mechanically.

User avatar
techsupport
Posts: 210
Joined: Sat Mar 03, 2012 2:32 pm

Re: gen6 unresponsive

Post by techsupport » Sat Sep 14, 2013 10:23 am

could you send a pic to our mailbox(myorder@geeetech.com).
after we check,we are willing to reship a new one to you.
thanks for your understanding.
Your real trustworthy partner in China!!
Email: forum@geeetech.com

grh
Posts: 5
Joined: Thu Sep 12, 2013 9:46 pm

Re: gen6 unresponsive

Post by grh » Sun Sep 15, 2013 9:43 pm

I have another question that is because I noticed there were no heatsinks on the stepper ic's, are they needed?

User avatar
techsupport
Posts: 210
Joined: Sat Mar 03, 2012 2:32 pm

Re: gen6 unresponsive

Post by techsupport » Mon Sep 16, 2013 9:29 am

yes.they need the heatsinks.
Your real trustworthy partner in China!!
Email: forum@geeetech.com

grh
Posts: 5
Joined: Thu Sep 12, 2013 9:46 pm

Re: gen6 unresponsive

Post by grh » Sun Oct 27, 2013 5:55 am

ok, now I feel so ignorant. Why can I not get my motherboards to get past their debug stage?

User avatar
jack
Posts: 77
Joined: Sat Mar 03, 2012 2:25 pm

Re: gen6 unresponsive

Post by jack » Wed Oct 30, 2013 9:36 am

Have you visit our WIKI?the link is http://www.geeetech.com/wiki/index.php/ ... lectronics

User avatar
jack
Posts: 77
Joined: Sat Mar 03, 2012 2:25 pm

Re: gen6 unresponsive

Post by jack » Wed Oct 30, 2013 9:38 am

here is some details that May be useful to you

User avatar
jack
Posts: 77
Joined: Sat Mar 03, 2012 2:25 pm

Re: gen6 unresponsive

Post by jack » Wed Oct 30, 2013 9:45 am

What you said not through is compilation or download?if is compilation,there is something wrong with your software.if is download,can you find your port in your device manager? if not ,maybe your driver is not good.

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests