Page 1 of 1

How to test endstop

Posted: Mon Mar 19, 2018 4:44 pm
by Admin
Here I will teach you how to test endstop/limit switch.
The first thing is connecting your printer to your computer with USB cable, then open repetier host. If you don't have that, you can click this link to download.
https://www.repetier.com/download-now/

Connect your printer, place all axis in the middle and then input G code "M119"
`UW3)]HKMCUX[T}I`HTZ`~P.png
`UW3)]HKMCUX[T}I`HTZ`~P.png (12.48 KiB) Viewed 21122 times
You will see this
X_MIN:open
Y_MIN:open
Z_MIN:open
It means all endstops function well
[7XKQFC3YYW033UEDR(97$O.png
[7XKQFC3YYW033UEDR(97$O.png (4.09 KiB) Viewed 21122 times
Then I will take Z axis as a example, press Z axis endstop with your hand, hold it, input G code "M119" again. you can test other axis in this way.
`UW3)]HKMCUX[T}I`HTZ`~P.png
`UW3)]HKMCUX[T}I`HTZ`~P.png (12.48 KiB) Viewed 21122 times
If your Z axis endstop can work well, you will get this.
X_MIN:open
Y_MIN:open
Z_MIN:TRIGGERED
If it still shows
X_MIN:open
Y_MIN:open
Z_MIN:open
It means there is a problem on your Z axis endstop, you need check the cable connection. you can also test it by replacing it with a good-working endstop .
F%F4YUT$(W~EMDTIEN%S056.png
F%F4YUT$(W~EMDTIEN%S056.png (8.55 KiB) Viewed 21122 times

Re: How to test endstop

Posted: Thu Oct 01, 2020 2:46 pm
by fobyxydin
If you are looking to buy a 3D printer then here the best options are given that will be easily accessible and anyone can buy them. to get your things by sitting at home you may visit https://allessayvikings.com/review-on-c ... paper-org/, here you will find so many online products.

Re: How to test endstop

Posted: Fri Jul 09, 2021 10:50 am
by kavontoy
So good. Okay let's go unblocked games. Game is too hot.