A10T

Post Reply
Horatis
Posts: 2
Joined: Sat Feb 08, 2020 3:12 pm

A10T

Post by Horatis » Wed Feb 26, 2020 7:41 pm

Hello Experts,

I recently got an A10T. Builded it and testing it currently with Cura. Somehow, I can select Extruder 2 and Extruder 3 for print. But when I try to print on Extruder 1 (T0) it uses the last given Virtual Extruder. An giving it T0 after slice in the GCode itself doesn't work either.

I already updated the Firmware and installed as described the Cura-Profile. What can be wrong?

Greets,
Horatis

Small Update:
I managed to have a print for every single extruder by manipulating the gcode. Well. Something is wrong:
Display 0/100%/0 - Prints
Display 0/0/100% - Prints
Display 100%/0/0 - Moves, but doesn't extrude.
Perhabs that helps.

Horatis
Posts: 2
Joined: Sat Feb 08, 2020 3:12 pm

Re: A10T

Post by Horatis » Mon Mar 02, 2020 3:31 pm

Solved the case.... The filament was cracked behind the extruder.. *sheesh* An with Cura 4.5 Every Extruder is usable...

Post Reply