A30M needs both filements loaded
A30M needs both filements loaded
I found with my A30M that if i don’t have filiment loaded in one side that the loaded filiment will fill the first few inches of the empty bowden tube while its extruding/printing. It makes sense; path of least resistance for the molten filiment will be the empty nozzle side. I found keeping both sides filled seems to reduce the issue. Is this behaviour normal for this type of multi filiment nozzle?
Re: A30M needs both filements loaded
I have many Problems with this printer. But I didn't have this Problem until yet.
Re: A30M needs both filements loaded
Hi, If using monochrome printing,
It is recommended to insert consumables at both ends,
Avoid nozzle clogging.
It is recommended to insert consumables at both ends,
Avoid nozzle clogging.
-Keep your mind and try to test it.
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!