Cura profile for Geeetech i3 DIY printer

Locked
User avatar
William
Site Admin
Posts: 4336
Joined: Tue Jun 07, 2016 9:38 am

Cura profile for Geeetech i3 DIY printer

Post by William » Wed Apr 24, 2019 11:29 am

Hi guys! :o
Are you can't find Geeetech i3 on Cura?
Don't worry
Refer to these:
------------------------------ :D --------------------------------------------------
------------------------------------------------------------------------------------
Update:Thanks for @vert's suggestions.
1. We added the G29 for the start code
We added the "G1 Y230 F6000" for the end code( 2019/1/7)
-----------------------------------------------------------------------------------------
2. We attached the PLA filament profile for Multi_mixer printer(2019/1/23)
-----------------------------------------------------------------------------------------
3. We set the default filament diameter to 1.75mm and it can work with Cura 4.0(2019/4/7)
-----------------------------------------------------------------------------------------
4.Thanks for @LisaE‘s suggestions.The profile updated.(2019.4.17)
-----------------------------------------------------------------------------------------
5. Deleted the "Heating gcode for nozzle/hotbed"in"start code".Added the meshes file.(2019.4.24)






1.Download Profile for Geeetech 3Dprinter
Cura4.0 resources.zip
(158.48 KiB) Downloaded 189 times
Download the PLA filament profile for A10M
Geeetech-pla.xml.zip
(932 Bytes) Downloaded 121 times

------------------------------ :D --------------------------------------------------
------------------------------------------------------------------------------------
2. Unzip the zip file then you will get "resources"folder
Cura-1.png
Cura-1.png (76.4 KiB) Viewed 2006 times
------------------------------------------------------------------------------------
------------------------------------------------------------------------------------
3.Copy "resources" to the
Cura installation directory
Default:
C:\Program Files\Ultimaker Cura 4.0
Cura-2.png
Cura-2.png (127.3 KiB) Viewed 2006 times
Cura-3.png
Cura-3.png (127.9 KiB) Viewed 2006 times
Cura-4.png
Cura-4.png (70.33 KiB) Viewed 2006 times
------------------------------------------------------------------------------------
------------------------------------------------------------------------------------
3.Import the PLA filament profile for Geeetech A10M
Cura-5.png
Cura-5.png (25.54 KiB) Viewed 2006 times
Cura-6.png
Cura-6.png (61.65 KiB) Viewed 2006 times

4.Done!Enjoy it!
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Locked

Who is online

Users browsing this forum: No registered users and 1 guest