Here are the sources :
https://github.com/MarlinFirmware/Marli ... -402426130
And the answer :...As per TMC: rapid changes in the motor velocity cause back EMF spikes that confuse the driver when in StealthChop2 mode and it shuts down. Switching to SpreadCycle should fix the problem....
https://github.com/MarlinFirmware/Marli ... -403590902
Seems possible to be a the same problem and may be the right solution solution, as at the moment when extruder stop, I can clearly eard a little "tic" sound....I now changed my E Stepper TMC2208 to SpreadCycle mode (over OTP) and this has solved the Problem. Looks like as @crzcrz said that he 2208 cant handle the high and rapid acceleration changes....