Marlin 1.1.9 firmware upgrade

Post Reply
DzzD
Posts: 84
Joined: Sat Oct 19, 2019 5:52 pm

Marlin 1.1.9 firmware upgrade

Post by DzzD » Fri Nov 01, 2019 7:36 pm

I am planning to upgrade my A20m to Marlin 1.1.9, I am wondering if anyone already done this and can give some feeback like is there any quality improvment on print ?

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Marlin 1.1.9 firmware upgrade

Post by William » Mon Nov 04, 2019 9:20 am

Hi, you can view the 2.0 version of vert
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

DzzD
Posts: 84
Joined: Sat Oct 19, 2019 5:52 pm

Re: Marlin 1.1.9 firmware upgrade

Post by DzzD » Mon Nov 04, 2019 7:46 pm

Yes, I've tested it :), compiled and running on my A20m, but didn't see any quality improvement.

I also have tried a junction deviation test print's (see picture), but I cant see any difference, why ?
Attachments
JD.jpg
JD.jpg (95.8 KiB) Viewed 11061 times

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Marlin 1.1.9 firmware upgrade

Post by William » Tue Nov 05, 2019 9:09 am

Hi, you can try to check if the z-bar is shaking and tighten it.
Check the bearing or the pulley for card issuance, and lubricate it with lubrication.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

DzzD
Posts: 84
Joined: Sat Oct 19, 2019 5:52 pm

Re: Marlin 1.1.9 firmware upgrade

Post by DzzD » Wed Nov 06, 2019 2:27 am

junction deviation gets better the lower the value the default in marlin 2 is 0.013 you tested from bad to worse not better.
Haa ok ! I understand, So I will try another range.

theju
Posts: 14
Joined: Mon Nov 04, 2019 6:03 pm

Re: Marlin 1.1.9 firmware upgrade

Post by theju » Fri Nov 15, 2019 11:05 pm

DzzD wrote:
Mon Nov 04, 2019 7:46 pm
Yes, I've tested it :), compiled and running on my A20m, but didn't see any quality improvement.
Hi DzzD, can you share your configuration.h ?

Thx
Ju

DzzD
Posts: 84
Joined: Sat Oct 19, 2019 5:52 pm

Re: Marlin 1.1.9 firmware upgrade

Post by DzzD » Sun Nov 17, 2019 6:57 am

Hi DzzD, can you share your configuration.h ?
Unfortunatly the forum doesn't let me share other files than ".gif/.jpg/..." so I try to inline it below

Take care as I use TMC2208 for X,Y,Z E0 and E1

DzzD
Posts: 84
Joined: Sat Oct 19, 2019 5:52 pm

Re: Marlin 1.1.9 firmware upgrade

Post by DzzD » Sun Nov 17, 2019 7:08 am

oops, done

(accustomed to some forums that block zip files)
Attachments
config.zip
(30.27 KiB) Downloaded 410 times
Last edited by DzzD on Sun Nov 17, 2019 7:15 am, edited 1 time in total.

theju
Posts: 14
Joined: Mon Nov 04, 2019 6:03 pm

Re: Marlin 1.1.9 firmware upgrade

Post by theju » Mon Nov 18, 2019 7:53 pm

DzzD wrote:
Sun Nov 17, 2019 7:08 am
oops, done

(accustomed to some forums that block zip files)
Thanks !

Post Reply