USB driver - always unknown

Post Reply
Bernd
Posts: 39
Joined: Mon Jun 13, 2016 2:07 pm

USB driver - always unknown

Post by Bernd » Sun Dec 09, 2018 4:19 am

I just can not get it to connect the A20M via USB to my computer Windows 10. Is there possibly a trick? I downloaded the CH41SER. But it comes always unknown USB device error 43! Can someone help ?

Bernd

blakilox
Posts: 14
Joined: Sat Nov 03, 2018 4:21 pm

Re: USB driver - always unknown

Post by blakilox » Sun Dec 09, 2018 1:31 pm

The Driver I used
http://www.wch.cn/download/ch341ser_zip.html

Though I have this on Windows 7, what I had to do was use the Ardwino IDE to edit the Baud Rate in the Firmware down to 115200 (The Max windows seems to support) so I'm talking about the Marlin firmware, editing the configuration.h file and reduce from 250000 to 115200
so first download and install the latest ArdwinoIDE, then get the Marlin Firmware for the A20M open it in Ardwino IDE, Edit that Configuration.h file and push up the firmware change to the printer (Yeah i know it's a chicken and the Egg thing though this seemed to work, so I wondered if the IDE has its own driver)

If you look at your Devices, the Comm port, the Max Speed, does it match the Baud rate listed in the A20M Control Panel? After I did that change it worked, perhaps in Linux it can go as high as 250000 though seems not in windows, or at least not for that driver

when you make that change in the Firmware you should see the Baud rate change reflected in the A20M Panel, then it should match the Baud Rate in the Windows Com device that you are using

I would suggest Geeetech send out the A20M's at 115200 as default, or at least look at what is going on there for a better fix for windows users, because it dosent seem to work strait out the box for Windows user (How about include a Software CD for your users, that may save them like a Week of frustration) its not like the slower speed will make the printer go faster so go for Safety settings please Geeetech

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: USB driver - always unknown

Post by William » Mon Dec 10, 2018 12:22 am

Bernd wrote:
Sun Dec 09, 2018 4:19 am
I just can not get it to connect the A20M via USB to my computer Windows 10. Is there possibly a trick? I downloaded the CH41SER. But it comes always unknown USB device error 43! Can someone help ?

Bernd
Maybe somewhere have a short circuit.
You can check them at first
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

User avatar
_kaktus_
Site Admin
Posts: 1260
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: USB driver - always unknown

Post by _kaktus_ » Tue Dec 11, 2018 2:13 am

Hi William.
;)

In my opinion, colleague was installing the wrong driver. :roll:
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: USB driver - always unknown

Post by William » Tue Dec 11, 2018 1:23 pm

_kaktus_ wrote:
Tue Dec 11, 2018 2:13 am
Hi William.
;)

In my opinion, colleague was installing the wrong driver. :roll:
I am checking the user manual and I found some mistakes.
I will contact them soon~
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

User avatar
_kaktus_
Site Admin
Posts: 1260
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: USB driver - always unknown

Post by _kaktus_ » Tue Dec 11, 2018 11:23 pm

:mrgreen:

Let the world of 3D printing be better with Geeetech.
:D
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: USB driver - always unknown

Post by William » Wed Dec 12, 2018 10:05 am

;)
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Bernd
Posts: 39
Joined: Mon Jun 13, 2016 2:07 pm

Re: USB driver - always unknown

Post by Bernd » Wed Dec 12, 2018 4:33 pm

Thanks for your help but it has been found that the 2560 board is broken and therefore no connection via USB could be made.

Bernd

Post Reply