hi all,
my display no longer shows anything. it glows but but no font is displayed.
what is wrong? display or mainboard damaged?
Display damaged?
Re: Display damaged?
Hi,you can try to reconnect the screen cable, then check if the printer is turned on normally, if there is any ve vb 5v light on the motherboard.
-Keep your mind and try to test it.
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: Display damaged?
i reconnected the screen cabel and the printer was turned on but display was without any fonts.
switched off and than i moved the cable back and forth and that helped.
ve and vb lights are on, no matter whether it shows font or not.
Re: Display damaged?
Hi,is your 5v light on? The reason for reconnecting the screen wiring may be the loose screen cable.
-Keep your mind and try to test it.
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: Display damaged?
which one is that?
- Attachments
-
- 20200215_224325.jpg (177.48 KiB) Viewed 14335 times
Re: Display damaged?
and after one day working display was that on it. restarted the printer and now again is the display without any font.
- Attachments
-
- 20200215_225359.jpg (416.28 KiB) Viewed 14335 times
Re: Display damaged?
Hi,Your motherboard display is normal, you can try to press and hold the reset button under the screen.
-Keep your mind and try to test it.
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: Display damaged?
my matherboard and display are normal?? realy???
- Attachments
-
- 20200216_111952.jpg (120.39 KiB) Viewed 14320 times
Re: Display damaged?
have changed cable and used ur soft, nothing helped. I also measured the connection(pin to pin) between matherboard and display, it is ok.vert wrote: ↑Sun Feb 16, 2020 7:44 pmhave a look at my github see example of the delay.
https://github.com/Vertabreak/Marlin
or better yet use my fork.
so i think the display is fucked up.
i can print over the repetier-host soft but nothing on display