Page 1 of 1
3D Touch mount for Prusa I3 Pro W
Posted: Wed Dec 06, 2017 3:51 am
by JustinSB
I am adding a 3D Touch to my Pro W, but the 3D Touch User Manual only gives links to the .stl files for the Pro B and the Pro X - not the Pro W. Which file should I use for the Pro W, or where can I download a specific Pro W .stl file?
Thanks
Re: 3D Touch mount for Prusa I3 Pro W
Posted: Wed Dec 06, 2017 5:19 pm
by William
You can print the .stl files for the Pro B, these two products are similar.
- iiii.png (514.29 KiB) Viewed 24933 times
Re: 3D Touch mount for Prusa I3 Pro W
Posted: Wed Dec 06, 2017 6:19 pm
by JustinSB
Thanks William, that makes sense. AFAIK, the Pro W is just the Pro B - but laser cut from plywood sheets rather than acrylic. I'm just not 100% sure if everything has precisely the same measurements.
Re: 3D Touch mount for Prusa I3 Pro W
Posted: Thu Dec 07, 2017 11:44 am
by William
Pro b and pro w in the firmware changes only minor differences because they are using the GT2560A + motherboard, the same specifications of the extruder and the overall frame.