Page 1 of 1
GTM32 RevB Board Problems
Posted: Sun Jul 09, 2017 9:37 am
by CdnTech
Hi,
I have a GTM32 Rev B that has failed.
I have checked the fuses and they are good.
Can you provide the schematics for this board ?
Re: GTM32 RevB Board Problems
Posted: Mon Jul 10, 2017 2:52 pm
by William
Could you provide more details about your board problems?
Re: GTM32 RevB Board Problems
Posted: Tue Jul 11, 2017 3:48 am
by CdnTech
Hi William,
After more examination it appears there is a problem in the 3.3v supply or possibly before it.
I am hoping to get the schematics to troubleshoot the problem further.
Re: GTM32 RevB Board Problems
Posted: Thu Jul 13, 2017 11:03 am
by William
I am sorry the schematic is not openly.could you tell me your further problems,and I will try my best to help you.
Re: GTM32 RevB Board Problems
Posted: Sat Jul 15, 2017 10:20 am
by CdnTech
Hi William,
What is so secretive about the GTM32 Rev B. ?
You have released the schematics for the GTM32 Pro B and the GT2560.
Why is it so hard to release the schematics for the GTM32 Rev B ?
Re: GTM32 RevB Board Problems
Posted: Sat Aug 05, 2017 8:59 pm
by kevau
I also have the same desire for a schematic but respect the wish for keeping the schematic private.
But could you at least give me the specification for components QB1 (placed next to the buzzer)?
I do not measure the correct diode drop (or what I think should be the correct values).
Re: GTM32 RevB Board Problems
Posted: Fri Sep 22, 2017 2:02 pm
by rynnn
I've been having issues with getting my rostock 301 with the gtm32 pro board to work. I'm new to 3d printing but I know some things about computers so thought I could get this machine up an running. I've been having trouble with getting instructions on how to get the bootloader to flash on the board, what I should be using the st-link for (I can't get it to link to the board), the jumper instructions for this board, the gtm32 pro, and how to get it to work, when I click home it just crashes into the printer bed, and does this jackhammer thing. So finally I saw the hotend twitch and the screen went blank on my printer and now the board isn't connecting with the hyperterminal, it just says Jump app failed! From what I'm reading I need a new board now. I've never seen this printer running and really want to see it up an running, it's only 7 months old, I bought it from one of my teachers at school who couldn't get it working. How do I get a replacement board, and how long does it take to get, please advise, thanks.
Re: GTM32 RevB Board Problems
Posted: Tue Sep 26, 2017 5:07 pm
by William
rynnn wrote: ↑Fri Sep 22, 2017 2:02 pm
I've been having issues with getting my rostock 301 with the gtm32 pro board to work. I'm new to 3d printing but I know some things about computers so thought I could get this machine up an running. I've been having trouble with getting instructions on how to get the bootloader to flash on the board, what I should be using the st-link for (I can't get it to link to the board), the jumper instructions for this board, the gtm32 pro, and how to get it to work, when I click home it just crashes into the printer bed, and does this jackhammer thing. So finally I saw the hotend twitch and the screen went blank on my printer and now the board isn't connecting with the hyperterminal, it just says Jump app failed! From what I'm reading I need a new board now. I've never seen this printer running and really want to see it up an running, it's only 7 months old, I bought it from one of my teachers at school who couldn't get it working. How do I get a replacement board, and how long does it take to get, please advise, thanks.
Please contact the technical support.
technical@geeetech.com
Re: GTM32 RevB Board Problems
Posted: Fri May 27, 2022 4:29 pm
by Ubedt
Great topic