GT2560 schematics

Post Reply
gidim
Posts: 17
Joined: Tue Jul 07, 2015 5:08 am

GT2560 schematics

Post by gidim » Wed Aug 12, 2015 8:00 pm

Hi.

Can I please have the schismatic of the GT2560 board? I want to add auto calibrate for the bed and I want to use 1 of the free connectors that I have on the board. I need to see how the board is connected so I can find the right connector and change the software to accommodate for the change.

Thanks.

Mark
Posts: 1553
Joined: Thu Aug 06, 2015 9:19 am

Re: GT2560 schematics

Post by Mark » Sat Aug 15, 2015 11:20 am

:(

gidim
Posts: 17
Joined: Tue Jul 07, 2015 5:08 am

Re: GT2560 schematics

Post by gidim » Sun Aug 16, 2015 4:51 pm

Hi.

Here is my design for the extruder fan and auto bed servo:
http://www.thingiverse.com/thing:966244

Now Im only missing the schematic...

Thanks.

gidim
Posts: 17
Joined: Tue Jul 07, 2015 5:08 am

Re: GT2560 schematics

Post by gidim » Mon Aug 17, 2015 5:56 am


mananee
Posts: 1
Joined: Mon Aug 24, 2015 4:31 pm

Re: GT2560 schematics

Post by mananee » Mon Aug 24, 2015 4:31 pm

good

Post Reply