Geeetech

Hi, I've got a little problem with a LCD on a G2s pro. When i start the printer the LCD screen is Ok, everything works (I can see temperature ect, ect) , i can click on the knob and saw the menu but when I start turning the knob the display become crazy and show strange caracters. the only way to g...

I have an issue when the unit is powered on the heat bed will climb in temperature and will not stop, and if I switch wires then the nozzle when not stop heating up what is wrong??? Hey,buddy!What the following link shows may help you: http://www.geeetech.com/forum/viewtopic.php?f=19&t=17039 http:/...

Yes,i'm sure.But you must ensure that the positive and negative orders are the corresponding. Ok, Thanks! What's the most practical way to check it, multimeter? My pleasure!No need to use a multimeter,it depends the wire's color.The red one is connected to the positive electrode,while the black one...

Yes,the only thing you should do is to ensure the two is to positive electrode. I know which is positive and which is negative because it's written on the PSU as you can see: http://i.imgur.com/MeR3VQt.jpg?1 Are you sure the order doesn't matter? Thanks again. Yes,i'm sure.But you must ensure that ...

Yes,the only thing you should do is to ensure the two is to positive electrode.

Maybe you can have a look at the web Mark gave.

OK，extremely looking forward.

Its my pleasure,davi!BTW,glad to see this

Hi,Andy About the firmware you can download it on our official website.Here is the link: http://www.geeetech.com/forum/viewtopic.php?f=20&t=17046 In addition，what caused the LCD, SD card and display didn't work maybe the wrong position of the LCD's and SD CARD's input,you can swap them first,that ma...

I two have gone with no reply from emails for sometime on several concerns. very unhappy with the service. I had plans on ordering another printer from here but thinking I may be better off with another brand. I had one control board that I believe shorted out after printing and the Z-axis failed, ...