Search found 148 matches
- Mon Jun 30, 2014 4:49 pm
- Forum: Stepper Motor
- Topic: RAMBo malfunction on z axis motors
- Replies: 20
- Views: 36831
Re: RAMBo malfunction on z axis motors
you can use my firmware 。so that can help me solve the problem
- Mon Jun 30, 2014 3:28 pm
- Forum: Stepper Motor
- Topic: RAMBo malfunction on z axis motors
- Replies: 20
- Views: 36831
Re: RAMBo malfunction on z axis motors
first of all,i‘m sorry. we change the z axis motoer‘s stepper driver mapping。
you should change the pin’s setting in “pin.h” file
#define DIGIPOT_CHANNELS {4,5,3,2,1} // X Y Z EO E1
you should change the pin’s setting in “pin.h” file
#define DIGIPOT_CHANNELS {4,5,3,2,1} // X Y Z EO E1
- Wed Jun 25, 2014 9:05 am
- Forum: Extruder
- Topic: Full Metal HOTEND continous CORK/STOPPER
- Replies: 6
- Views: 12382
Re: Full Metal HOTEND continous CORK/STOPPER
you don't need to clean the hot end each 1-2printings,the problem isthat the choke is not tightened
- Tue Jun 24, 2014 10:58 am
- Forum: Extruder
- Topic: Full Metal HOTEND continous CORK/STOPPER
- Replies: 6
- Views: 12382
Re: Full Metal HOTEND continous CORK/STOPPER
The upper screw‘s function is choke,the other one is Fixed Laying head
- Tue Jun 24, 2014 10:23 am
- Forum: Control Board
- Topic: Melzi won't connect to PC
- Replies: 3
- Views: 11489
Re: Melzi won't connect to PC
our board‘s bootloard support windows os 。
here is arduino IDE‘s link:http://www.geeetech.com/wiki/images/0/0 ... -1.0.1.zip
here is firmware’s link :http://www.geeetech.com/wiki/images/9/9 ... rinter.zip
here is Printrun ’Introduction and how to install:http://reprap.org/wiki/Printrun
here is arduino IDE‘s link:http://www.geeetech.com/wiki/images/0/0 ... -1.0.1.zip
here is firmware’s link :http://www.geeetech.com/wiki/images/9/9 ... rinter.zip
here is Printrun ’Introduction and how to install:http://reprap.org/wiki/Printrun
- Mon Jun 23, 2014 4:34 pm
- Forum: Extruder
- Topic: Getech Kossel Delta All Metal J-head hotend issue
- Replies: 4
- Views: 10765
Re: Getech Kossel Delta All Metal J-head hotend issue
sorry to hear that,i suggest you can conect with our Sales staff
- Mon Jun 23, 2014 10:02 am
- Forum: Extruder
- Topic: Full Metal HOTEND continous CORK/STOPPER
- Replies: 6
- Views: 12382
Re: Full Metal HOTEND continous CORK/STOPPER
1.heating the hotend
2.Release the screws in your hotend 3.Unscrew your hotend and clean up your abs(keep heating)
4.Tighten the hotend
5.Tighten the Release the screws
now you can enjoy printing
2.Release the screws in your hotend 3.Unscrew your hotend and clean up your abs(keep heating)
4.Tighten the hotend
5.Tighten the Release the screws
now you can enjoy printing
- Mon Jun 23, 2014 9:52 am
- Forum: Extruder
- Topic: Getech Kossel Delta All Metal J-head hotend issue
- Replies: 4
- Views: 10765
Re: Getech Kossel Delta All Metal J-head hotend issue
1.heating the hotend
2.Loosen the screws 3.then clean up your material
4.Tighten the hotend(be careful )
5.Tighten the screws,the job is done,then you can enjoy your printing
2.Loosen the screws 3.then clean up your material
4.Tighten the hotend(be careful )
5.Tighten the screws,the job is done,then you can enjoy your printing