Geeetech

So I should have no problem upgrading to a 50w cartridge,

Can anyone tell me the power output max for the GT2560 V3 Extruder MOSFETS? I am looking to upgrade to 50w Cartridge.

Thank you

I normally print via SD because I can't tie my PC up for hours. Last night I plugged in my USB cable and Win 10 saw it right away. Showed RAMPS(COM8) in device manager. I was thinking great this is going to be easy. Opened Simplify3D and tried to connect and was getting Error opening COM port. Doubl...

One last thing to try is swap nozzles if you haven't done that yet. If you have then I would say something is wrong with the printer.

https://youtu.be/A453dCxRpjQ

Sorry for the kids in the background. Here is the video from my Ender 3. The hot end setup is close to the A10. My A10M is busy printing.

Sorry I ended up super busy last night. Tonight after I get back home from shopping, around 6:30 pm US CDT. I will make a quick video of what I have found with my A10M and my Creality Ender 3 on the extruder. I hope that it will. Also without the nozzle in force by hand some filament through. I had ...

Take you tube and push it all the way down in the head until it stops. From what I have found. If it is not seated all the way down you will get that jam and extruder click. If you feel that maybe you still have a jam. Remove the nozzle while HOT. Be careful. And see if you can clear it. Using "wast...

I am new to 3d printing. Like I am about a month and a half in. I have a Creality Ender 3 and an A10M. In post 8 you showed your filament melted funny. This problem is from your PTFE tube not being pushed all the way down in the block. I already ran into this one with my left extruder on the A10M. C...