Search found 39 matches

by Tparent
Thu Apr 16, 2020 10:32 pm
Forum: Geeetech A10 Series
Topic: Add OFFSET ability in official Firmware (.hex) for V4 board
Replies: 1
Views: 2867

Add OFFSET ability in official Firmware (.hex) for V4 board

Hi, Just discovered that since GT2560 V4.0, no offset option are available : - no menu item : Prepare / Set Home Offsets - no support of M428 GCode - no support of M206 GCode Any chance to convince development team that giving the ability to define in a permanent way offset (especially on Z) is real...
by Tparent
Sun Sep 01, 2019 6:33 am
Forum: Geeetech I3 M201
Topic: Replacing GTM32 pro board by GT2560 RevB
Replies: 3
Views: 5164

Re: Replacing GTM32 pro board by GT2560 RevB

I believe that I have completed the challenge :) Still the need to solder 2 connector on the board and assemble one plug for the second Z stepper (option Z2 has is dedicate A4988 driver : DUAL Z in Marlin) Also discovered the two last pin values to obtain a full map of available pins (see above): - ...
by Tparent
Mon Aug 26, 2019 2:12 am
Forum: Geeetech I3 M201
Topic: Installing Marlin 2.0 on M201
Replies: 8
Views: 10915

Installing Marlin 2.0 on M201

IMG_20190828_202135.jpg UPDATE : Pending issues SOLVED -> SD Card reader on LCD WORKING (replace pins_GTM32xxx file by updated one available on the google drive) -> Mixer WORKING (but sure to apply u8glib library update as described below) I wish to really thanks InnerBushman and Vertabreak who tha...
by Tparent
Fri Aug 16, 2019 6:27 am
Forum: Geeetech I3 M201
Topic: Replacing GTM32 pro board by GT2560 RevB
Replies: 3
Views: 5164

Replacing GTM32 pro board by GT2560 RevB

I'm currently replacing the GTM32 pro by a GT2560 RevB. Why downgrade the board performance by regressing to a 16 bits ? To be honest, I'm more looking for versatility (be able to print and laser engrave) than speed/performance. Why the revB ? Because the connectors are mainly compatible with the M2...
by Tparent
Mon Aug 05, 2019 3:39 am
Forum: Geeetech I3 M201
Topic: Synchronising G01 and M106 command (laser engraving)
Replies: 4
Views: 5625

Re: Synchronising G01 and M106 command (laser engraving)

Hi, Thank you for your fast answer. Yes the printer is a M201 with a GTM32 pro VB board. I tried two version of FW (1.03 and 1.04) without improvement. Numerous test with a lot of M and G command (delay waiting etc..) in interactive or SD card execution without finding any solution. At the end, to a...
by Tparent
Sun Aug 04, 2019 10:49 pm
Forum: Geeetech I3 M201
Topic: Synchronising G01 and M106 command (laser engraving)
Replies: 4
Views: 5625

Synchronising G01 and M106 command (laser engraving)

Dear all, I'm trying to synchronise the start/stop of an engraving laser. The code looks like the following : M107 P2 G28 G0 Z50 G0 X127.6479 Y140.893923 F1200 M106 P2 S100 ; Laser ON ... What is happening is the activation of the M106 P2 S100 (laser ON) just after the G28 (home completion) and ther...
by Tparent
Mon Jul 22, 2019 5:33 am
Forum: Geeetech I3 M201
Topic: Upgrade from 1.0.1 to 1.0.5 gives 2 lines BLOCK display
Replies: 4
Views: 2505

Re: Upgrade from 1.0.1 to 1.0.5 gives 2 lines BLOCK display

Nice the red color "(GTM32)" definitively help to understand the difference / border line between the two boards :D

Have a great day
by Tparent
Mon Jul 22, 2019 5:30 am
Forum: Geeetech I3 M201
Topic: Upgrade from 1.0.1 to 1.0.5 gives 2 lines BLOCK display
Replies: 4
Views: 2505

Re: Upgrade from 1.0.1 to 1.0.5 gives 2 lines BLOCK display

Hey ! Firmware page is maybe a little bit cryptic :-) Thanksfully a between bracket "(for GTM32)" is supposed to make the difference between the pro and the "not pro" (too bad, the not pro seems to be more powerful than the pro. :lol: ----------------------------------- Firmware Page : 1) Firmware f...
by Tparent
Mon Jul 22, 2019 1:18 am
Forum: Geeetech I3 M201
Topic: Upgrade from 1.0.1 to 1.0.5 gives 2 lines BLOCK display
Replies: 4
Views: 2505

Upgrade from 1.0.1 to 1.0.5 gives 2 lines BLOCK display

Just assembled my brand new M201. Trying to challenge mu i3 pro C which is working like a charm but with a limited printing volume. Everything worked as expected untit I tried to upgrade in V1.0.5. Board is the new/last GTM32 VB. -> connecting, putting jumper, loading and verifying FW loaded in the ...
by Tparent
Tue Feb 12, 2019 5:01 am
Forum: Geeetech I3 Pro C
Topic: prusa i3 pro c
Replies: 1
Views: 2380

Re: prusa i3 pro c

The profile which seems to be the most compatible is the Raise3D N2 Plus Dual

You still need to make the "size/setting" adaptation

Hope it helps

Thierry