Geeetech

Hi I hope someone can help me. I moved over to Marlin 2 on my I3 Pro B. It's working really nicely through Octoprint etc, but on the menu on the printer itself, "Prepare" has been replaced by "Resume Print". There is no print to resume, and no SD card involved. I know this is incorrect as Marlin 2 i...

Thank you so much - that is brilliant.
Ben

I had a similar issue with mine. The wheels under the bed need to be sorted out for you to progress. There should be no "looseness" on the bed at all. The wheels on the left hand side as you look from the front just need to be tight, but the ones on the right hand side are on eccentric nuts/spacers,...

That's perfect thanks. I didn't have much time on Sunday and none on Monday, but tonight I can tinker
Thanks
Ben

I would really appreciate that. Thanks so much

So from top right as you look at the board from above what is the required order of wires?

Hi After a totally unsuccessful attempt to get the BLTouch working well with the A10, I am attempting to return to using the Z-Stop. I took out the connecting wire when I put the BLTouch in so now I want to connect the wires to the right holes on the connector. However, I can't work out which wire g...

I returned the printer to V1.35

Hi
I have the exact same problem when the printer is plugged into my laptop by USB.
Mine doesn't do this when the USB is not plugged in. Try without the USB and see what happens.

I believe this problem is going to be fixed in the new firmware.

I didn't realise there was more than one app from Geeetech - I will look into this
Thanks for the help