Search found 9 matches

by brent_jackson
Thu Sep 24, 2015 2:06 am
Forum: Firmware
Topic: Rostock Mini G2S Auto Level Malfunction
Replies: 10
Views: 20119

Re: Rostock Mini G2S Auto Level Malfunction

THANK YOU CHRIS!!! That was indeed the problem. I had connected the switch leads to the 2 outer positions such that when the probe was down and not in contact with the print bed it would send Triggered. This in the instructions under the Check the Status of Endstop section, step 2. But I read it in...
by brent_jackson
Tue Sep 22, 2015 2:48 am
Forum: Extruder
Topic: Delta Rostock mini G2s Extruder drives Axial motors
Replies: 29
Views: 38458

Re: Delta Rostock mini G2s Extruder drives Axial motors

Re: Delta Rostock mini G2s Extruder drives Axial motors
Postby Mark » Tue Sep 08, 2015 8:34 pm

We are testing the latest firmware now, it won't take long to fix the problem, plz wait with patience, tks!
It has been 2 weeks now... any update to fix this problem?
by brent_jackson
Wed Sep 09, 2015 6:44 am
Forum: Firmware
Topic: Rostock Mini G2S Auto Level Malfunction
Replies: 10
Views: 20119

Re: Rostock Mini G2S Auto Level Malfunction

There's a typo in my message above. It should, of course, read G29 for auto level rather than G20.\

My message was wrong. My printer is still not working using G29.
by brent_jackson
Wed Sep 09, 2015 6:36 am
Forum: Firmware
Topic: Rostock Mini G2S Auto Level Malfunction
Replies: 10
Views: 20119

Re: Rostock Mini G2S Auto Level Malfunction

Video of failed auto level behavior posted to https://www.youtube.com/watch?v=9wMnkB3hA50
by brent_jackson
Mon Sep 07, 2015 11:46 pm
Forum: Firmware
Topic: Rostock Mini G2S Auto Level Malfunction
Replies: 10
Views: 20119

Re: Rostock Mini G2S Auto Level Malfunction

Yes, after some significant tweaking to get the bed perfectly level manually and set the printer height in firmware and Repetier (to 204.3), and editing out the G20 auto level command from the Slic3r-generated G-code I am able to print my first object successfully. Printing accuracy isn't spectacula...
by brent_jackson
Sat Aug 29, 2015 10:37 am
Forum: Firmware
Topic: Rostock Mini G2S Auto Level Malfunction
Replies: 10
Views: 20119

Rostock Mini G2S Auto Level Malfunction

Hi there, I'm having issues with the G29 auto level command on my new system. The behavior I see is that G29 causes the print head to descend to about 60mm above the heat bed with X slightly positive and Y at about -30mm. It moves slowly counterclockwise at that height for about 5 seconds and then q...
by brent_jackson
Fri Aug 28, 2015 7:00 am
Forum: Extruder
Topic: Delta Rostock mini G2s Extruder drives Axial motors
Replies: 29
Views: 38458

Re: Delta Rostock mini G2s Extruder drives Axial motors

Thank you both Mark and Jeff for your responses. I imagine that if the motors were incorrectly connected, then I would not be able to home the system and extrusion would not sometimes work. I have since updated to the August 24 version of the firmware with no perceivable difference in behavior. I mi...
by brent_jackson
Thu Aug 20, 2015 1:12 am
Forum: Extruder
Topic: Delta Rostock mini G2s Extruder drives Axial motors
Replies: 29
Views: 38458

Delta Rostock mini G2s Extruder drives Axial motors

On my system I have completed initial build and calibration but have yet to be able to print anything. What I observe is that, using the Repetier-Host interface, manual commands to advance extruders will occasionally cause X/Y/Z axial stepper motors to activate, driving upwards. If the system is in ...
by brent_jackson
Fri Aug 07, 2015 7:28 am
Forum: Resoures Sharing
Topic: STL files for delta rostock mini G2&G2S and I3 printer
Replies: 16
Views: 72556

Re: STL files for delta rostock mini G2&G2S

Thanks so much! :D

What I could really use is the templates for top and bottom frame plates. I would like to modify to cut acrylic for a larger frame that would also accomodate a 12" non-heated plate.