To much complicated for me…
between T0 pins I have around 9 k ohm, the same on T1
cannot test further
Search found 17 matches
- Sat Jul 05, 2014 1:46 am
- Forum: Control Board
- Topic: Problem reading temperature Rambo Board
- Replies: 23
- Views: 39132
- Fri Jul 04, 2014 1:17 am
- Forum: Control Board
- Topic: Problem reading temperature Rambo Board
- Replies: 23
- Views: 39132
Re: Problem reading temperature Rambo Board
I'm not expert in dmd soldering, I've only tested all the resistors with the multimeter and always got around 4.3 k value
- Thu Jul 03, 2014 2:48 pm
- Forum: Control Board
- Topic: Problem reading temperature Rambo Board
- Replies: 23
- Views: 39132
Re: Problem reading temperature Rambo Board
Sorry, with "but nothing" I meant that there was still the problem reading the temperature...
I was able to upload the new firmware, but I had the same result for temperature reading... MIN TEMP ERROR.
I was able to upload the new firmware, but I had the same result for temperature reading... MIN TEMP ERROR.
- Thu Jul 03, 2014 1:04 pm
- Forum: Control Board
- Topic: Problem reading temperature Rambo Board
- Replies: 23
- Views: 39132
Re: Problem reading temperature Rambo Board
I'm using IDE 1.0.5 on Mac with RAMBo Hardware add-on
- Thu Jul 03, 2014 12:43 pm
- Forum: Control Board
- Topic: Problem reading temperature Rambo Board
- Replies: 23
- Views: 39132
Re: Problem reading temperature Rambo Board
Bad news… :-( I've uploaded the firmware you gave me, I just changed the TEMP_SENSOR_0 to 1. But nothing… I have compiled the code using RAMBo hardware add-on for arduino ide and even for 2560 board, but the result is the same. < 06:38:36: ¤start < 06:38:36: echo: External Reset < 06:38:36: Marlin 1...
- Thu Jul 03, 2014 3:13 am
- Forum: Control Board
- Topic: Problem reading temperature Rambo Board
- Replies: 23
- Views: 39132
Re: Problem reading temperature Rambo Board
where can I get the firmware?
D.
D.
- Thu Jul 03, 2014 12:28 am
- Forum: Control Board
- Topic: Problem reading temperature Rambo Board
- Replies: 23
- Views: 39132
Re: Problem reading temperature Rambo Board
Hi
many thanks… I'll wait for the firmware.
I've tried with another thermistor but the problem is the same.
I've modified the code in order to print the raw min temp and I
got 16368 (aka 16*1023).
many thanks… I'll wait for the firmware.
I've tried with another thermistor but the problem is the same.
I've modified the code in order to print the raw min temp and I
got 16368 (aka 16*1023).
- Fri Jun 27, 2014 10:09 pm
- Forum: Control Board
- Topic: Problem reading temperature Rambo Board
- Replies: 23
- Views: 39132
Re: Problem reading temperature Rambo Board
Firmware is Marlin V1 download from github https://github.com/ErikZalm/Marlin
- Fri Jun 27, 2014 6:41 pm
- Forum: Control Board
- Topic: Problem reading temperature Rambo Board
- Replies: 23
- Views: 39132
Re: Problem reading temperature Rambo Board
The thermistor is a Epcos 100k. I've even built a new temperature array with the specs Thermistor & PID settings The thermistor is a 100k @ 25 Deg.C type B57550G, it has a B25/100 (beta) value of 4092, for more info see the data sheet. (http://www.epcos.com/inf/50/db/ntc_13/NTC_Glass_enc_sensors_G55...
- Fri Jun 27, 2014 2:42 pm
- Forum: Control Board
- Topic: Problem reading temperature Rambo Board
- Replies: 23
- Views: 39132
Re: Problem reading temperature Rambo Board
Hi
I've added board photos in may G+
here is the link
https://plus.google.com/photos/11271648 ... unzlaKFxAE
at first sight, I can't see any other part missing
any other suggestion ?
I've added board photos in may G+
here is the link
https://plus.google.com/photos/11271648 ... unzlaKFxAE
at first sight, I can't see any other part missing
any other suggestion ?