Search found 210 matches

by techsupport
Wed Aug 06, 2014 9:14 am
Forum: Stepper Motor
Topic: Prusa i3 with Sanguinololu 1.3 not running
Replies: 3
Views: 9191

Re: Prusa i3 with Sanguinololu 1.3 not running

yes, Waiting for your good news!
by techsupport
Tue Aug 05, 2014 6:56 pm
Forum: Stepper Motor
Topic: Prusa i3 with Sanguinololu 1.3 not running
Replies: 3
Views: 9191

Re: Prusa i3 with Sanguinololu 1.3 not running

hi mike99ca sorry for later reply, I read your post, I quite agree with the way you use new products, The way we use may help to other new users All your operation is correct, now my suggestion is that you should be in all caps to try again. If you have other questions, please feel free to contact u...
by techsupport
Tue Aug 05, 2014 6:44 pm
Forum: Extruder
Topic: Hot End V2.0 0.35mm & 0.4mm nozzle for 3mm LEAK
Replies: 16
Views: 26781

Re: Hot End V2.0 0.35mm & 0.4mm nozzle for 3mm LEAK

Dear lloyd059 sorry for later reply, Because I rest for three days,The method, I give you can solve most of the leaking problem. also I have communicate with our engineers about your product material leakage problem, Your question is relatively special Perhaps is a larger gap between the screw threa...
by techsupport
Tue Aug 05, 2014 5:19 pm
Forum: Assembly
Topic: Prusa i3 with Iduino Mega 2560 + lcd 2004
Replies: 5
Views: 13098

Re: Prusa i3 with Iduino Mega 2560 + lcd 2004

Dear saaxomphone
sorry to late reply, Because thermistor is small, not easy to find, you check your package carefully and the ground.
If you still can't find, you can send a picture of your packaging, we will give you a satisfactory answer.
waiting for your repely, thank you. Best regards!
by techsupport
Wed Jul 30, 2014 7:04 pm
Forum: Extruder
Topic: Hot End V2.0 0.35mm & 0.4mm nozzle for 3mm LEAK
Replies: 1
Views: 6310

Re: Hot End V2.0 0.35mm & 0.4mm nozzle for 3mm LEAK

I reply you another post, thank you!
by techsupport
Wed Jul 30, 2014 6:32 pm
Forum: Extruder
Topic: Hot End V2.0 0.35mm & 0.4mm nozzle for 3mm LEAK
Replies: 16
Views: 26781

Re: Hot End V2.0 0.35mm & 0.4mm nozzle for 3mm LEAK

Hi lloyd059 I'm sorry to appear this kind of phenomenon, I checked photos carefully your provide. I think the hotend leak a lot Maybe due to no tightening between 1 and 2, Refer to the attached figure. so I suggest you clean up the leak, tightening between 1 and 2, Then, I think it will work perfect...
by techsupport
Wed Jul 30, 2014 5:51 pm
Forum: Assembly
Topic: Prusa i3 with Iduino Mega 2560 + lcd 2004
Replies: 5
Views: 13098

Re: Prusa i3 with Iduino Mega 2560 + lcd 2004

Hi saxomophone
Please refer to the following link. the electronic parts connect.
http://www.geeetech.com/wiki/index.php/Ramps1.4
The appended drawings have a clear connection.thank you.
Best regards!
by techsupport
Wed Jul 23, 2014 4:11 pm
Forum: Open Hardware
Topic: Arduino GPRS Shield SIM900 not working by software
Replies: 11
Views: 73101

Re: Arduino GPRS Shield SIM900 not working by software

Hi jafarin
Are the baud rate of GPRS communication and simulation of serial port communication rate consistent?
by techsupport
Mon Jul 21, 2014 4:49 pm
Forum: Open Hardware
Topic: My Experience with the GSM/GPRS Shield
Replies: 1
Views: 8153

Re: My Experience with the GSM/GPRS Shield

Hi observing
Thank you very much for your sharing, I think it will help more users, when they encounter similar problems,
Thank you for your support to us,At the same time we will do better,thank you !
Best regards!
by techsupport
Sat Jul 19, 2014 11:34 am
Forum: Open Hardware
Topic: voice recognition module
Replies: 2
Views: 8134

Re: voice recognition module

Hi, rwyman
I haven't using the SPCE61a based voice recognition module,
but I can help you on the basis of the arduino voice recognition module, if you are interested.
Best regards!